1 / 2Threaded Stainless Steel Swing Check Valve — product view
Threaded Stainless Steel Swing Check Valve
PN16 stainless check valve with threaded ends
Forward flow opens the hinged closure; reverse flow seats it. On threaded pipework, confirm thread standard, installation orientation and the flow needed for stable opening as well as nominal pipe size.
Final selection requires the complete product code and the service conditions.
UNDERSTAND THE APPLICATION
A solution for your application.
Application areas
Reverse-flow prevention in threaded process lines · Compatible-fluid distribution circuits
Selection considerations
Verify installation orientation, flow velocity and closing conditions.
Opening and stable operation depend on the line conditions. Consider the risk of reverse flow together with flow direction and the proposed installation orientation.
MANUFACTURER DATA
Technical specifications
| Body | AISI 304 |
| Pressure class | PN16 |
| Catalogue temperature range | −20 to +180 °C |
Confirm the permissible orientation and pressure–temperature limits in the selected check valve’s technical document. Assess the effect of rapid closure on upstream and downstream pressures at system level.
DOWNLOADABLE RESOURCES
Technical documents
Open manufacturer PDFs directly from our website and save them to your device. Check the model and document revision.
Frequently asked questions
Is this the same as the flanged swing check?+
No. This version has a stainless body and threaded ends. Verify pipe connection and installation length separately.
Does installation orientation matter?+
Yes. Verify orientation and the flow arrow against the instructions for the selected valve.
What should I verify before specifying Truevalve Threaded Stainless Steel Swing Check Valve?+
Confirm the permissible orientation and pressure–temperature limits in the selected check valve’s technical document. Assess the effect of rapid closure on upstream and downstream pressures at system level.
What should I include in my quotation request?+
Line size, connection and orientation; Fluid, temperature and flow range; Reverse-flow and closure conditions. For replacement equipment, also provide the nameplate and connection dimensions.
Where can I check the technical drawing and dimensions?+
Open the manufacturer PDF in the Technical Documents section. Match the relevant entry to the product type, nominal size and variant code. Not every option in a family catalogue belongs to the same product.
EXPLORE THE CATALOGUE
In the same category
Check valves
Stainless Steel Disc Check Valve
Reverse-flow control with a stainless body and spring-loaded disc
Check valves
Dual-Plate Check Valve
Dual-plate model with a GG25 body and EPDM seal
Check valves