1 / 2Cast Iron Swing Check Valve — product view
Cast Iron Swing Check Valve
Single swing check valve with a cast iron body
A single swinging closure limits reverse flow. Assess mounting orientation, fluid characteristics and connection requirements for the cast-body valve. Transient pressures at pump shutdown may differ from steady-state pressure.
Final selection requires the complete product code and the service conditions.
UNDERSTAND THE APPLICATION
A solution for your application.
Application areas
Water transfer and distribution lines · Limiting backflow at pump discharge
Selection considerations
Verify installation orientation, flow velocity and closing conditions.
Opening and stable operation depend on the line conditions. Consider the risk of reverse flow together with flow direction and the proposed installation orientation.
MANUFACTURER DATA
Technical specifications
| Body | Cast iron |
| Maximum catalogue pressure | 16 bar |
| Maximum catalogue temperature | 120 °C |
Confirm the permissible orientation and pressure–temperature limits in the selected check valve’s technical document. Assess the effect of rapid closure on upstream and downstream pressures at system level.
DOWNLOADABLE RESOURCES
Technical documents
Open manufacturer PDFs directly from our website and save them to your device. Check the model and document revision.
Frequently asked questions
Can this check valve isolate the line for maintenance?+
It restricts backflow; it does not replace maintenance isolation. Plan a separate means of safe isolation.
What should be measured for a replacement?+
Record nominal size, connection type, face-to-face length, mounting orientation and normal flow.
What should I verify before specifying Truevalve Cast Iron Swing Check Valve?+
Confirm the permissible orientation and pressure–temperature limits in the selected check valve’s technical document. Assess the effect of rapid closure on upstream and downstream pressures at system level.
What should I include in my quotation request?+
Line size, connection and orientation; Fluid, temperature and flow range; Reverse-flow and closure conditions. For replacement equipment, also provide the nameplate and connection dimensions.
Where can I check the technical drawing and dimensions?+
Open the manufacturer PDF in the Technical Documents section. Match the relevant entry to the product type, nominal size and variant code. Not every option in a family catalogue belongs to the same product.
EXPLORE THE CATALOGUE
In the same category
Check valves
Stainless Steel Disc Check Valve
Reverse-flow control with a stainless body and spring-loaded disc
Check valves
Threaded Stainless Steel Swing Check Valve
PN16 stainless check valve with threaded ends
Check valves