1 / 2Electric Valve Actuator — product view
Electric Valve Actuator
Motorised valve operation without a compressed-air line
This drive turns a butterfly or ball valve stem through an electric motor and gearing. It does not include the valve body. Match supply voltage, required seating and breakaway torque, and the permitted operating time at the actual process conditions.
Final selection requires the complete product code and the service conditions.
UNDERSTAND THE APPLICATION
A solution for your application.
Application areas
Ball valve automation · Butterfly valve control where plant air is unavailable
Selection considerations
Check valve torque, mounting interface, supply and required failure position.
Identify the valve to be driven, including its code, stem dimensions and mounting pattern. Body size alone does not establish a match.
MANUFACTURER DATA
Technical specifications
| Supply options | 220 V AC or 24 V DC |
| Enclosure protection | IP67 |
Determine torque or thrust at the most demanding operating condition. Check the actuator output against the manufacturer’s data for the available supply and travel.
DOWNLOADABLE RESOURCES
Technical documents
Open manufacturer PDFs directly from our website and save them to your device. Check the model and document revision.
Frequently asked questions
Can one actuator be powered from either voltage?+
The catalogue lists two supply alternatives. Match the order code and nameplate voltage to the control-panel output.
Is valve size alone enough to choose a drive?+
No. Specify valve type, operating differential pressure, torque and stem interface as well.
What should I verify before specifying Truevalve Electric Valve Actuator?+
Determine torque or thrust at the most demanding operating condition. Check the actuator output against the manufacturer’s data for the available supply and travel.
What should I include in my quotation request?+
Valve code, stem and mounting interface; Torque or thrust and travel; Supply, control signal and fail position. For replacement equipment, also provide the nameplate and connection dimensions.
Where can I check the technical drawing and dimensions?+
Open the manufacturer PDF in the Technical Documents section. Match the relevant entry to the product type, nominal size and variant code. Not every option in a family catalogue belongs to the same product.
EXPLORE THE CATALOGUE
