1 / 2Flanged Strainer — product view
Flanged Strainer
Cast-body strainer for flanged distribution lines
This line accessory catches debris to help protect downstream equipment. It is not a shut-off valve. Allow clearance for screen withdrawal and provide safe isolation for cleaning.
Final selection requires the complete product code and the service conditions.
UNDERSTAND THE APPLICATION
A solution for your application.
Application areas
Upstream equipment protection in heating loops · Debris retention in process-water lines
Selection considerations
Specify screen opening, pressure loss and clearance for cleaning.
Do not choose the screen opening from pipe size alone. Specify the particle size to retain and the pressure loss permitted by the equipment being protected.
MANUFACTURER DATA
Technical specifications
| Body | Cast iron |
| Catalogue maxima | 16 bar; 150 °C, separate limits |
Pressure loss changes as debris accumulates. Check the selected screen aperture, the body pressure–temperature rating and the clearance required to withdraw the screen.
DOWNLOADABLE RESOURCES
Technical documents
Open manufacturer PDFs directly from our website and save them to your device. Check the model and document revision.
Frequently asked questions
Which screen opening should be selected?+
Specify the smallest particle to retain and the allowable pressure loss, then confirm screen opening at order.
What should be monitored in service?+
Record the differential pressure with a clean screen as a baseline. A subsequent increase can indicate a need for inspection and cleaning.
What should I verify before specifying Truevalve Flanged Strainer?+
Pressure loss changes as debris accumulates. Check the selected screen aperture, the body pressure–temperature rating and the clearance required to withdraw the screen.
What should I include in my quotation request?+
Line size, connection and orientation; Fluid, particle size and design flow; Allowable pressure loss and access for cleaning. For replacement equipment, also provide the nameplate and connection dimensions.
Where can I check the technical drawing and dimensions?+
Open the manufacturer PDF in the Technical Documents section. Match the relevant entry to the product type, nominal size and variant code. Not every option in a family catalogue belongs to the same product.
EXPLORE THE CATALOGUE
