1 / 2Images from this product family. The illustrated variant may differ by model.
e-LNE
Single-stage in-line centrifugal pump
Lowara e-LNE is a single-stage in-line pump family with suction and discharge flanges on the same axis. Its back-pull-out design can allow service access to the pump assembly without disconnecting pipework when installation conditions permit. Verify flow, head, liquid temperature, pressure class and materials against the full model code and duty point.
Final performance and suitability are verified for the selected model and duty point.
UNDERSTAND THE APPLICATION
A solution for your application.
Application areas
HVAC heating and cooling circuits · Building services and water circulation · Clean or lightly contaminated liquid transfer in industrial processes
Selection considerations
Circuit pressure loss, fluid temperature and glycol concentration influence selection. Check compatibility with connection dimensions and control strategy.
Share your operating conditions with our technical team. We can assess liquid compatibility, hydraulic duty point and installation requirements together to identify the suitable variant.
MANUFACTURER DATA
Technical specifications
| Maximum flow | 305 m³/h for 2-pole models; up to 900 m³/h for 4-pole models |
| Maximum head | 95 m for 2-pole models; up to 57 m for 4-pole models |
| Liquid temperature | Standard range −25…+120 °C; some configurations up to +140 °C on request |
| Maximum working pressure | 16 bar at 90 °C; 10 bar at 120 °C |
| Protection class | IP55 |
| Motor | 2 / 4 pole |
Values describe the published product family. Maximum flow and maximum head do not represent the same duty point. Verify selection against the specific model curve and current technical data.
DOWNLOADABLE RESOURCES
Technical documents
Open manufacturer PDFs and save them to your device. Check the model and document revision.
Frequently asked questions
What applications is Lowara e-LNE used for?+
Lowara e-LNE is a single-stage in-line pump family with suction and discharge flanges on the same axis. Its back-pull-out design can allow service access to the pump assembly without disconnecting pipework when installation conditions permit. Verify flow, head, liquid temperature, pressure class and materials against the full model code and duty point.
Where can I find technical catalogues and manuals?+
Use the PDF links in the Technical Documents section of this page to access manufacturer documents. Check the model, frequency and document revision before use.
What information is needed for selection and a quotation?+
Share flow, total head, liquid properties, temperature, power supply and installation conditions. Mixers also require tank dimensions, liquid level and solids concentration.
EXPLORE THE CATALOGUE
In the same category
In-line & circulation
e-LNT
Twin-head in-line pump
In-line & circulation
ecocirc / ecocirc+
Electronically controlled circulator
In-line & circulation
ecocirc XL / XLplus
Circulator for commercial systems
In-line & circulation