1 / 3Images from this product family. The illustrated variant may differ by model.
3(L)M, 3(L), 3(L)P
AISI 316 stainless EN 733 standardised pump
EBARA 3L4 is an EN 733 dimensional end-suction pump family manufactured in AISI 316 stainless steel. For clean-liquid duties requiring corrosion resistance, material compatibility, seal and motor selection should follow the fluid properties. Its back-pull-out arrangement can permit service of rotating parts without separating pipe connections when installation allows.
Final performance and suitability are verified for the selected model and duty point.
UNDERSTAND THE APPLICATION
A solution for your application.
Application areas
Water supply and pressure boosting · HVAC and cooling towers · Industrial washing and process liquids · Irrigation, pools and tank circulation
Selection considerations
Assess the duty flow and head alongside liquid chemistry and suction conditions. Check the solids limits of open-impeller models separately.
Share your operating conditions with our technical team. We can assess liquid compatibility, hydraulic duty point and installation requirements together to identify the suitable variant.
MANUFACTURER DATA
Technical specifications
| Maximum flow | Up to 240 m³/h |
| Maximum head | Up to 100 m |
| Maximum working pressure | 10 bar |
| Liquid temperature | −20…+90 °C depending on version; special variants −10…+75 °C |
| Motor | 2 / 4 pole; IP55; insulation class F |
| Efficiency | MEI > 0.4 |
Values describe the published product family. Maximum flow and maximum head do not represent the same duty point. Verify selection against the specific model curve and current technical data.
DOWNLOADABLE RESOURCES
Technical documents
Open manufacturer PDFs and save them to your device. Check the model and document revision.
Frequently asked questions
What applications is Ebara 3(L)M, 3(L), 3(L)P used for?+
EBARA 3L4 is an EN 733 dimensional end-suction pump family manufactured in AISI 316 stainless steel. For clean-liquid duties requiring corrosion resistance, material compatibility, seal and motor selection should follow the fluid properties. Its back-pull-out arrangement can permit service of rotating parts without separating pipe connections when installation allows.
Where can I find technical catalogues and manuals?+
Use the PDF links in the Technical Documents section of this page to access manufacturer documents. Check the model, frequency and document revision before use.
What information is needed for selection and a quotation?+
Share flow, total head, liquid properties, temperature, power supply and installation conditions. Mixers also require tank dimensions, liquid level and solids concentration.
EXPLORE THE CATALOGUE
